Stuffed Giraffe - Rumpled Quilt Skins

I found this product line by accident. When I was helping my mother clean out her sewing room last summer, I found an ad for stuffed animal fish that she must have ripped out of a magazine a long time ago. 

Needless to say, this product line is now one of my favorites. They're a line of stuffed animals called Rumpled Quilt Skins. They have all different types of animals (sheep, zebra, fish, etc.) and part of the way that you make them creates the rumpled look they have to their skin. I think they're really sweet. 

There is an etsy site where you can purchase and download the pattern as a PDF. Here's the link:

https://www.etsy.com/shop/rumpledquiltskins?ref=shop_sugg

I decided to make this giraffe for my friends' baby's first birthday. Here's my disclaimer. I'm not good at making stuffed animals. There are a lot of steps to making this, and it this was almost a deterrent for me. However, the directions were very clear, and I think it came out pretty well. 

You needed to purchase 2 fabrics to make your giraffe. I chose yellow and orange batiks. You also need muslin and interfacing.

Step one was to make the checkered fabric. To do this, you cut the fabric into strips, then sew it together with the colors alternating.

Then you cut it apart in the other direction, and finally sew it back together with the colors staggered.

The biggest pattern pieces are the giraffe body. You cut two out of this fabric that you've created. 

Then you get to the part that I didn't really understand at first. You sew the bodies down to a piece of muslin, criss-crossing the seams on the checkerboard. I tried to do this in a contrasting color thread so it would look more interesting.

 
Then you trimmed the muslin off of the body pieces. After that, you have to assemble all the body pieces. As I said earlier, this pattern had some of the best directions for stuffed animal assembly that I've seen. Additionally, a lot of the pieces have detailed decorative stitches in them. There were circular patterns on the feet and some other similar designs that really brought a lot of detail to the project. 

After construction, you end up with a crazy looking inside-out giraffe.

You flip it right-side out and...

...a flat giraffe is born. After this you put the giraffe into the washing machine and the drier. The way that you sewed the body pieces down to the muslin makes the body rumpled looking - giving the company its name.

Here's the giraffe post-drier: nice and rumpled

You can sew two eyeballs onto your giraffe. You can also use buttons, but since I was making mine for a one-year old, I decided to go with thread eyeballs.

Finally, it's stuffing time...

Sew him up, and he's done! I hope my friends like stuffed animals, because I know that I'm going to be ordering many more of these patterns in the future. I absolutely love the ease of the pattern, the rumpled look, and the overall design.

Barn Block of the Month - Farm Girl Quilt Variation

 

 
I really like the idea of Block of the Month. I've done a couple...of which I don't think I've completed any. Typical. The quilt guild that I belong to does a Block of the Month where someone chooses which block to make, and those who participate make two. One block you keep (which will end up a 12-block quilt by the end of the year) and one block you bring to the meeting, where you get put into a drawing to win all of the blocks for that month. (I won January...blog on the results of those blocks forthcoming...)

This year we are making blocks out of the Farm Girl Vintage Quilt Book. This book is designed along the lines of one of the farmer's wife quilt books.

You can get this book in many places, including on Amazon. It seems to run about $25 most places.
Here's the link to it on Amazon.

https://www.amazon.com/Farm-Girl-Vintage-Lori-Bonnet/dp/0988174979/ref=sr_1_1?ie=UTF8&qid=1486925311&sr=8-1&keywords=farm+girl+vintage

It's a nice book with a lot of interesting blocks. The actual blocks, such as the ones pictured on the quilt, are 6" finished. The book also has larger-block options for you to set the blocks into - such as farmhouses, with tractors, etc.

I've been making the single block-of-the month blocks for the guild and for myself, however I could not see myself making a barn to go with each block. I just have no interest in making a whole quilt of barns. It's not really my style.

My mother came up with a brilliant idea: to make one barn block and design a way to hang each month's block on it. This way it's one barn and you just change the blocks like a calendar.

First, I made the barn.

Then I unmade the barn, replacing the white square with a barn-colored square. That square is where your "quilt block" goes when you're making the complete piece. I don't know what I was thinking when I made it white. Lame.

I sewed some detail into the barn door...(just don't look at the wonky quarter).

Afterwards, I opened up two spots in that seem to put the bias tape I was using to create the block-holding system. Then I sewed it closed with those in place.

Then I sandwiched it with batting and muslin, quilted it stitch-in-the-ditch around the barn, made a sleeve out of the muslin, and machine bound the piece with my fail-safe blanket stitch.

Here's the completed barn:

So each month I will make a square to hang on the barn. The January block is called a Butter Churn Block and includes the infamous, dreaded, half-square triangles which never come out straight. I picked winter colors of January:

 
After making the block, I layered a piece of binding and white fabric and sewed around the edges, leaving gaps for the tabs to hang it. Then I flipped it, inserted two pieces of bias tape, and top-stitched it closed. Then I quilted in the negative space.

Here's the February block - the Churn Dash Block - more half-square triangles (I forsee many more in my future). I did the February block with reds for Valentine's Day and followed the same process.

I needed two dowels to hang this project, both of which I stole from my mother. I even needed to break out my long-neglected circular saw to cut them down. Here's the finished product...

My mother made hers by blending different barn blocks from the book. She wanted a silo in hers, but we both didn't like the fact that the barn is only shown from the front and the quilt would be hung where the door would be in that variation. So she used the same barn that I did but added the silo to the side. Here's hers as a point of comparison:

Here's my only concern about this project moving forward...as you can see by the pictures of the two blocks, I have to place the tabs in different places based on where the colored fabric lays. I'm going to have to check every block as I make them to make sure the tabs end up in places where they can actually be hung. Not the end of the world, but something else for my teacher-brain to try to remember and think about.

Quick Runner - a Fast, Pretty, and Easy Gift

This is a super easy table runner that I made for my best friend for Christmas. 

Surprise: my mother just told me she designed the pattern for the runner. You can e-mail her at LaPrincipessa40@aol.com for info about purchasing it.

I made this runner with five fabrics. It is definitely possible to make it with less; probably 3-4, depending on how you arrange them. The print fabrics I used are by Phillip Jacobs. I also used a Kaffe Fassett green shot cotton and a blue batik.

I started off by embroidering a bird on the batik that would match the fabric in the outside squares. This bird embroidery was downloaded from urbanthreads. 
Here's the link: http://www.urbanthreads.com/products.aspx?productid=UT3536

I also looked at a million hummingbird embroidery files in trying to select one and finally settled on this "Doodle Hummingbird" because it is more open than not. I thought that an embroidery that was too dense would detract from the overall piece. I tried to pick up colors in the embroidery that would match the colors in the other blocks.

Assembly for this project is simple - sew the borders attaching the squares horizontally, sew the borders on top. Sew outside borders. 

Because I hate binding, I decided to do a wrap-around binding. There are three levels of binding.

1. The correct way to bind - sew to the front on the machine, sew to the back by hand.

2. The lazy way - sew to the back by machine, sew to the front by machine, use a decorative stitch to disguise your laziness as creativity.

3. The super lazy way - make the back of the piece about an inch larger than the front, fold that in half moving around the piece, fold it over the front, and machine sew it to the front by machine, using a decorative stitch to disguise your laziness as creativity.

I'm a solid level three binding quilter on small projects. On bigger projects, I go for number two.

Of course the backing was a little too small to fit the front of the quilt and do the wrap-around binding, so I had to add a small strip of green down the middle of the back, which actually ended up looking interesting on the front, so I'm really happy with that decision anyway.

After sandwiching top, batting, and backing, I quilted a decorative stitch centered on the green borders using a variegated blue thread.

Finally, I completed my wrap-around binding, took some pictures, and packed it up in a box to ship off to Florida.

This pattern was super quick and easy and I think I'm going to use it to make myself a runner out of some Kaffe Fasset fabrics that I received for Christmas.